Electronics & Semiconductor
23 articles
-
Electronics & Semiconductor
8.0” TFT LCD Display 1024×768 XGA – LVDS Interface with Normally Black Mode | Industrial & Medical Display Module in smart-home control panels: a interface primer for engineers
The short answer A display module module at over a serial interface is a sensible choice when the host side already speaks the right…
-
Electronics & Semiconductor
Specifying a 0.71-Inch 1080x1920 AMOLED for an Automotive Aftermarket Display
The short answer An automotive aftermarket display is specified against a harsher life than a consumer gadget: a hot cabin, constant…
-
Electronics & Semiconductor
First Light on a 0.96-Inch IPS Panel: Wiring ST7735S over SPI
The short answer A 0.96-inch panel is small enough that bring-up failures are almost never about the glass.
-
Electronics & Semiconductor
DMKTT04802ANA 4.82" TFT LCD Display 480×1120 in industrial HMI panels: a interface primer for engineers
The short answer A display module module at over a serial interface is a sensible choice when the host side already speaks the right…
-
Electronics & Semiconductor
2.4" IPS Display 240x320 Capacitive - SPI, MCU, RGB in industrial HMI panels: a touch primer for engineers
The short answer A display module module at over a serial interface is a sensible choice when the host side already speaks the right…
-
Electronics & Semiconductor
0.65” AMOLED Microdisplay 2560×1440 QHD – 1000-Nit MIPI Near-Eye Display for AR/VR & Optical Engines in head-mounted medical viewers: a ar vr primer for engineers
The short answer A display module module at over a serial interface is a sensible choice when the host side already speaks the right…
-
Electronics & Semiconductor
1.54" ePaper 200x200 - IIC/SPI in portable sensor readouts: a epaper primer for engineers
The short answer A display module module at over a serial interface is a sensible choice when the host side already speaks the right…
-
Electronics & Semiconductor
What are the key features to look for in a research-grade touch display for laboratory equipment?
When you're picking a research-grade touch display for lab equipment, the first thing you need to look at is optical bonding and…
-
Electronics & Semiconductor
How does an SPI interface improve performance in a Graphic OLED display?
An SPI (Serial Peripheral Interface) interface improves performance in a Graphic OLED display by enabling significantly faster data…
-
Electronics & Semiconductor
How to solder a 1.77 inch SPI TFT module?
To solder a 1.77 inch SPI TFT module, you will need a fine-tipped soldering iron set to 300°C to 350°C, lead-based solder (like 63/37…